-
Archives
- July 2020
- June 2020
- December 2019
- August 2019
- April 2019
- March 2019
- February 2019
- July 2016
- June 2016
- April 2016
- January 2016
- November 2015
- October 2015
- September 2015
- August 2015
- July 2015
- June 2015
- May 2015
- April 2015
- March 2015
- February 2015
- January 2015
- November 2014
- October 2014
- September 2014
- August 2014
- July 2014
- June 2014
- May 2014
- April 2014
- March 2014
- February 2014
- January 2014
- November 2013
-
Meta
Monthly Archives: October 2015
Laser cut wall lamp with ws2812b and arduino nano
5.6mm plywood cut using a 40w laser cutter. The ws2812b led strip is hooked up an an arduino nano using the neopixel library from adafruit : https://github.com/adafruit/Adafruit_NeoPixel . The program running in the video is one of the example sketches … Continue reading
Posted in Atmel, Hardware, laser cutter
Tagged arduino nano, lamp, laser cutter, ws2812b
Leave a comment
FFTalk : a way for multiple sensors to talk to one receiver
The title description is quite broad so allow me to explain more clearly what I’ve been working on for the past couple of weeks. Think of the television remote or more specifically using IR diodes and IR receivers to transmit … Continue reading
Matchbox Car v2 (fail)
PCB and schematic: Pictures of the built board: This PCB is pretty rough around the edges, I made it a few weeks ago with the intention of etching it at home but then decided to give OSHpark a go just … Continue reading
Posted in Atmel, PCBs, Robots
Tagged attiny48, matchbox car, oshpark, pcb, robot, stepper
2 Comments