ws2812b – wattnotions

Laser cut wall lamp with ws2812b and arduino nano

Shane Ormonde8 years ago01 mins

5.6mm plywood cut using a 40w laser cutter. The ws2812b led strip is hooked up an an arduino nano using the neopixel library from adafruit : https://github.com/adafruit/Adafruit_NeoPixel . The program running in the video is one of the example sketches that comes with the library. I tried etching the front of the lamp and it…

wattnotions on Messing about with trilaterationSeptember 27, 2023
Not unnecessarily complicated enough :D
Mikhail Grushinskiy on Messing about with trilaterationSeptember 26, 2023
Why don’t you just use GPS with 2 cm accuracy which is achievable with RTKLib?
Maria on Low power magnetic hold and release mechanismAugust 25, 2023
From where i can read out more about it. Do you have any suggestive readings?
Mikhail Grushinskiy on OpenWave – take 2May 28, 2023
You would also need fast Fourier transform to find out waves frequently to use it as reference point to give…
Mikhail Grushinskiy on OpenWave – take 2May 28, 2023
You would need wind sensor real-time data. You would need to tilt compensate wind data from real time IMU data.…